ニュース

−40°C vs −70°C Environmental Test Chamber: Which One Do You Actually Need?

2026-09-28 17:22:23
admin

Compare −40°C and −70°C environmental test chambers based on actual DUT temperature, thermal mass, live heat load, cooling rate, stabilization and humidity requirements. Learn why chamber minimum temperature alone is not enough to select the right configuration.

View Detail

10 Thermal Shock Chamber Manufacturers to Know in 2026

2026-09-28 11:59:09
admin

Compare 10 thermal shock chamber manufacturers in 2026 and learn what really matters when selecting a system, from chamber architecture and loaded recovery to DUT size, thermal load, utilities, and support.

View Detail

USB Type-C Insertion & Extraction Force Testing Guide: Force, Fixtures, Cycles and Force–Travel Analysis

2026-09-24 16:33:30
admin

An engineering guide to USB Type-C insertion and extraction force testing, covering mating cycles, test speed, fixture alignment, mounting conditions, force-travel analysis, measurement errors and test system configuration.

View Detail

ASTM B557 アルミニウム引張試験:応力ひずみ曲線から試験システム選択まで

2026-09-24 15:12:47
admin

ASTM B557は、鍛造および鋳造アルミニウムおよびマグネシウム合金製品の引張試験を扱っています。この工学ガイドは、試料の形状、ひずみ測定、サンプリング方向、グリップ、破壊挙動が降伏強度、引張強度、伸縮にどのように影響するかを説明し、これらの要件が引張試験機の構成にどのように反映されるかを説明します。

View Detail

How Much Chamber Space Should Your Test Specimen Occupy?

2026-09-24 10:00:22
admin

Learn how much environmental chamber space a test specimen should occupy and why DUT volume alone is not enough. This guide explains specimen occupancy, airflow blockage, orientation, fixture loading, clearance, thermal mass and live heat load for practical chamber selection.

View Detail

RFQでコネクタ挿入および抽出力テスターを指定する方法

2026-09-23 14:20:32
admin

DUT情報、作業力、使用可能なトラベル、治具、速度、力移動データ、耐久性、システム構成を網羅したコネクタフォーステスターRFQ作成の実践的なエンジニアリングガイド。

View Detail

ニュース

Helpful links

About ITM

Follow us