Designed for all kinds of electrical and electronic, automotive, metal, plastic, chemical, aerospace, medical building materials and other products, parts and materials for high and low temperature constant and gradual change of hot and humid test and other environmental simulation reliability test.
| Product Name | Rapid temperature change tester KTB-880L(No load 20℃/min) |
| Temperature Range | -70°C to +150°C |
| RAMP Temperature Range | -40℃ to +85℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature deviation | ≤±2℃ |
| Temperature uniformity | ≤2.0°C (-40 to +85°C range) |
| RAMP Temperature Change Rate | Adjustable within 20° C/min (no load) Test Methods. |
| RAMP Temperature Change Rate | 80% of -40℃~ +85℃ temperature range |
| Temperature overshoot | (-27.5℃~ +72.5℃) Center point can reach the average speed -40℃~ +85℃ (the whole air outlet can reach the average speed) |
| Maximum Overload | Adjustable within 20℃/St2℃/min (with 45kg aluminum ingot) Test Methods. |
| Load | Average of -40℃~+85℃ temperature range. |
| Noise | Measurement of -40℃~+85℃ temperature range 80% (-27.5℃~+72.5℃) center point of the air outlet can reach the average speed. |
| Effective Volume | Load placement: three partitions, each layer of three 5kg aluminum ingots, a total of 45kg aluminum ingots |
| Inner Box Dimension | ≤5℃ |
| Dimensions of the outer case of the test box | Load capacity of each layer of the box: 50KG, total two layers |
PRODUCT FEATURES:
1, Precise temperature control.
2, Wet temperature adjustment.
3, Stable performance
4, Multiple protection.
Product use: This equipment is suitable for high and low temperature humidity test of various electronic products, aging test of LED, PCB and other products. Special requirements can be customized, such as low temperature and low humidity test: 3C/10%RH; 2, 5C/10%RH, etc. The inner box size can be customized, the temperature and humidity range can be customized, and the test room floor load-bearing capacity: 600kg/m2 (uniform load) is made of fully welded stainless steel SUS304 anti-skid plate.
This machine is to test heat endurance, cold endurance, dry endurance, wet endurance of various materials. It applies for quality control of electronic goods, electric appliance, measurement device, food, automobile, metal, chemical, plywood, aviation, medical and etc.
This equipment is suitable for all kinds of electrical and electronic products and other products, parts and materials to carry out high and low temperature constant and gradual change, humidity and heat test and other environmental simulation reliability test.
other uses may cause injury to personnel and damage to equipment.
Testing and storage of samples of flam mable。
In addition to testing the adaptability and the characteristics of the product had been changed under the general conditions of temperature and humidity combination (High-low temperature & storage, temperature cycling, high temperature and high humidity or moisture condensation test) by simulatable products, low humidity and constant temperature-humidity test chamber can also test whether the crazing and breakage of the product would happen under the conditions of low temperature and low humidity, high temperature and low humidity, high temperature and high humidity, low temperature and high humidity. Further more, the static content in air under the low humidity condition is many time more than the general condition, and it is said that most damage of the electronic components is caused by static.
Meeting the requirements of international specification test (IEC, JIS. JB, MIL...) to ensure the consistency of international measurement programs (including testing procedures, conditions and methods) to avoid cognitive differences and reduces the measurement uncertainties.
High and low temperature test chamber applying to electrical engineering, electronic products, components and the adaptive test of materials during storage, transportation and use in high and low temperature.
Designed for a variety of electronic products machine high and low temperature and humidity test, LED, PCB and other products aging test, special requirements can be customized, such as low-temperature and low-humidity test recognized: 3 ℃/10% RH; 2, 5C/10% RH, etc., the size of the inner box to accept customized, temperature and humidity Fan to accept customized. Laboratory floor load-bearing capacity: 600kg/m2 (uniform load) made of fully welded stainless steel SUS304 non-slip plate.
Thermal Shock Test Chamber is designed to test the material structure or composite materials, in the instant after the extremely high temperature and extremely low temperature under the continuous degree of tolerance, in order to test in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage. To be tested completely static test mode is the current electronic parts testing, research, and semiconductor production line with a large number of screening, can save a lot of consumables testing costs. Fast operation and high reliability. Suitable for metal, plastic, rubber, electronics, aerospace .... Material testing.
塩水噴霧試験機 塗装、コーティング、メッキ、陽極酸化後のさまざまな材料の表面耐食性をテストするように設計されています。
試験規格
GB/T5170.8、GB/T2423.17、ISO-376837693770、ASTM-B117B268、JIS-DO201H8502 H8610K5400Z2371
